Product Category

Share to:

Led stamping and dividing machine Jiangsu led stamping and dividing machine Kunshan led stamping and dividing machine Shanghai LED stamping and dividing machine

  • YSPE-8T
  • 宇顺力

Technology - proven track record

1. The manufacturer's relevant experience in the industry, specific customers, market share and other manufacturer qualifications, scale, customers and industry stability. Sincere Technology, Guanghong Technology, Customer Stability

2. The manufacturer's experience in USI, whether it is the same model or other equipment used by USI - can meet the process requirements and have few failures.

FPC punching and dividing machine-YSPE punching and dividing machine features:

1. The PCBA splitter is a splitter.

2. The equipment has a compact structure, a solid body, and the cylinder adopts Taiwan Yadeco.

3. The equipment runs smoothly, with little vibration and low noise.

4. Chinese touch screen display, the panel is clear, the Chinese alarm function is displayed, and the abnormal alarm is clear at a glance.

5. General equipment. Various molds can be replaced, and the replacement of molds is convenient and fast.

6. Equipment safety:

7. Double switch hand action starts.

8. The equipment is equipped with a slide in and out of the lower die, and the lower die enters and exits automatically, making it convenient and safe to pick and place products.

9. Set the emergency stop switch to stop the machine in time if there is a problem.

10. Set up a safety door to avoid entering the mold by mistake during installation and debugging (not setting a safety door during normal operation will not work)

11. Set up a safety gate shooting device. The mold is placed on the wrong board, the injection device senses the error, and the mold cannot enter

12. Safety air pressure setting function, over-limit alarm. Automatic counting, over-limit shutdown.

13. Reduce the internal stress generated when cutting the board and avoid tin opening

14. High-efficiency stamping of semi-finished PCB and FPC, the designated product supplier of the world's top 500

Equipment details:

Device parameter password protection: password protection - three-level password protection

Stamping stress: depends on the product

Interface operation - simple operation: William touch screen

Whether the falling speed of the punch is adjustable: adjustable-adjustable

Adjustable range of punch stroke - the bigger the better - 80mm±15mm adjustable

In and out mode: automatic

Safety -: Grid - Safety Door - Emergency Switch

Travel: The bigger the better - 110mm

Punch tonnage: ≥10t-15t

Punch adjustment accuracy: the higher the better - 0.01mm

Applicable mold types: the more types, the better - all kinds of precision steel molds

Equipment factory report: there are factory reports - various test reports

Mould times life monitoring -: monitoring - one year guarantee

Model switching time - short time -: within 5 minutes

Total weight: 850kg

CMK:>1.67 >1.67

Punch speed - the faster the better: about 9s

Stamping copper substrate PCB thickness range: 0mm~2mm-0mm~3mm

Equipment voltage: 220V

Machine size: length, width and height 1000*800*1750mm

Device power: 40W

Equipment air pressure: -0.5-0.7mpa

Maximum size range of punched PCB: ≥350*350mm-the bigger the better-450mm*350mm

Punching copper substrate PCB accuracy: ±0.05mm-±0.05mm

Copper substrate PCB punching burr: burr <0.1mm - no burr

Copper powder residue on the surface of copper substrate PCB: no copper powder residue - no copper powder residue - half of the waste will automatically fall into the drawer for recycling

The flatness of the copper substrate PCB stamping surface: the PCB cutting surface is flat and smooth - the pcb cutting surface is flat and smooth

Welcome customers to sample or send samples to test machine evaluation!

[Old brand of sub-board machine, Yushun No. 1] "Yushun Sub-board Machine" Suzhou Yushun Kunshan Dongguan Changan Yushun Automation Equipment Co., Ltd. specializes in the research and development of milling and sub-board machines, PCBA routers, led sub-board machines, light strip sub-boards Trigger, punching sub-board machine, FPC punching board sub-board machine, PCB sub-board machine, PCB circuit board sub-board machine, curve board sub-board machine, pneumatic sub-board machine, circuit board sub-board machine, PCB cutting machine, PCB Gong board machine, aluminum substrate board machine, knife board machine, automatic board machine, curve board machine, etc. The equipment is mainly used in: various soft and hard PCB boards, fr4/fr6 PCB, soft FPC, LED light bars, mobile phone tablets and other communication digital electronics, household appliances, LED lighting, security electronics and other related electronic industries LED light bars, aluminum Substrate, copper substrate stamping and dividing machine, etc.

Suzhou yushunli Electronics Co., Ltd. South China address: (Headquarters)

Address: No. 10, Shanquan Road, yongtou village, Dongguan City, Guangdong Province

Tel /tel:0769-88087410

Miss Liu's consultation Tel.: 13862072520

East China address: Address: No. 1068, Jinyang East Road, Kunshan City, Suzhou City, Jiangsu Province (Guorui Industrial Park)

Tel /tel:0512-62751429

Mr. Cao's consultation Tel.: 13450659407

Email /mail:   

Business scope: laser base plate splitting machine, automatic milling cutter splitting machine, online PCB router machine, PCB, FPC, base plate, copper base plate, aluminum base plate cutting splitting die, stamping splitting machine, punching machine, non-standard automatic customized full-automatic MCPCB splitting machine # font automatic splitting machine FPC laser splitting equipment light strip splitting machine FPC splitting machine PCB splitting machine V cut cutting machine punch splitting machine, base plate pulse welding machine, base plate wire welding machine, Substrate optical device module hot press


Related Products

Keep in touch
 +86 13450659407

Quick Links

Get inspired

Subscribe for our newsletter
Copyright © YUSH Electronic Technology Co.,Ltd