Product Category

Share to:

Plate splitting machine automatic curve plate splitting machine yushunli manufacturer price plate splitting machine plate splitting machine

  • YSVC-600
  • 宇顺力


Plate splitting machine automatic curve plate splitting machine yushunli manufacturer price plate splitting machine plate splitting machine


Full automatic PCB splitting machine ysvc-600 technical specification:

Single side working dimension: 290mm x 350mm

Four axis servo drive: X, Y1, Y2, Z

X-Y AC servo speed: 0-1000mm / sec

Host + dust collector weight: 800 kg

Machine size: 1075mm × 1430mm × 1460mm(D × W × H)

Calibration accuracy of CCD camera: ± 0.01mm

Size of dust collection cabinet: 640mm × 785mm × 1760mm(D × W × H)

Plate stress value: 300u ε following

X-Y repetition accuracy: ± 0.02mm

Power of dust collector: 3HP (option 5HP)

Cutting accuracy: ± 0.08mm

PCB cutting thickness: 0.2mm-6.0mm

Tool diameter: 0.8-2.3mm

Z AC servo speed: 0-800mm / sec

NSK spindle speed: max.60000rpm

Double table structure

1. Double slide rails and double platforms of cylinders are used for operation It can cut different types of products at the same time, greatly reducing the waiting time for taking and placing plates. At the same time, it can change the dual platform to a large single platform, increase the working size, and greatly improve the flexibility of the equipment.

Lower dust suction spindle structure

1. Adopt high-speed imported spindle to cut the plate, greatly reduce the cutting stress, high precision, small inertia and fast response.

2. The milling cutter detection system monitors the milling cutter status in real time, effectively preventing the continuous operation after the cutter is broken.

3. The brand-new vision system, uniform circular light source, and brightness adjustment function make all types of mark points better identified, and adapt to PCB with different colors such as tin plating, copper plating, gold plating, tin spraying. The whole system is equipped with visual alignment compensation function.

Lower dust collection mode structure

1. Funnel type sealing design, 45 degree inclined angle is adopted at the suction port to reduce the vortex generated by dust inside.

CNC special controller

1. Independent CNC special controller integrates the control part into one, with strong loop control stability, high accuracy, fast response transmission and strong anti-interference.

Dust collector

High efficiency motor and fan blade are adopted, with large suction. The built-in polyester needle felt dust removal bag has large void ratio, good air permeability, strong oxidation resistance, and noise can be controlled within 80 dB.

after-sale service

1. The warranty period of the whole equipment is one year. In case of quality problems, after-sales maintenance and replacement are provided free of charge.

2. The after-sales service personnel are senior professional and technical personnel of the company. They can only work independently after passing the company's formal training and examination.

3. After receiving the equipment failure notice, if the equipment fails to work normally, the after-sales department shall reply within half an hour in the Pearl River Delta and dispatch personnel to the site within 2 hours to solve the problem; Give an answer within half an hour, and then send after-sales personnel to the site to solve the problem within 24 hours according to the specific situation. (if the machine cannot be started normally, the after-sales personnel shall communicate with the customer and arrive at the site within the time required by the customer).

4. The company's after-sales personnel are on standby 24 hours a day, regardless of Saturdays, Sundays and holidays.

5. After the equipment arrives at your company, our company will arrange engineering and technical personnel for installation and commissioning.

6. Our company can arrange after-sales technicians to stay in the customer's company for three days to be responsible for training and technical guidance (the time can be extended according to the customer's appropriate requirements) until they are accepted.

7. Our after-sales technicians are responsible for comprehensive training. Your operators and technicians provide wholehearted service to the installation and operation of our equipment without reservation.

8. If required by the client company, our company can help the client company to conduct the operation and commissioning test of the board splitting machine for its technicians


Welcome customers to come or send samples to test machine for evaluation!

[old brand of board splitting machine, yushunli is the first to be promoted] "yushunli board splitting machine" Suzhou yushunli Kunshan Dongguan Chang'an yushunli automation equipment Co., Ltd. specializes in developing milling cutter type board splitting machine, PCBA router, LED board splitting machine, light bar board splitting machine, Punch Board splitting machine, FPC punch board splitting machine, PCB board splitting machine, PCB circuit board splitting machine, curve board splitting machine, pneumatic board splitting machine, circuit board splitting machine, PCB cutting machine, PCB Gong board machine, aluminum substrate board splitting machine, walking knife board splitting machine, Automatic plate splitting machine, curve plate splitting machine, etc. The equipment is mainly used in various soft and hard PCB boards, FR4 / fr6 PCB, soft FPC, LED light strip, LED light strip, aluminum substrate, copper substrate stamping and splitting machine, etc. of mobile phone tablet and other communication digital electronics, household appliances, LED lighting, security electronics and other related electronic industries.

Suzhou yushunli Electronics Co., Ltd. South China address: (Headquarters)

Address: No. 10, Shanquan Road, yongtou village, Dongguan City, Guangdong Province

Tel: 0769-88087410

Ms. Liu: 13862072520

East China address: Address: No. 1068, Jinyang East Road, Kunshan City, Suzhou City, Jiangsu Province (Guorui Industrial Park)

Tel: 0512-62751429

Mr. Cao: 13450659407

Email / mail:

Business scope: laser substrate splitting machine, full-automatic milling cutter splitting machine, online PCB router machine, PCB, FPC, substrate, copper substrate, aluminum substrate cutting and splitting die, stamping splitting machine, splitting machine, non-standard automatic customized full-automatic MCPCB splitting machine # font automatic splitting machine FPC laser splitting equipment light bar splitting machine FPC splitting machine PCB board splitting machine V cut blanking machine punch splitting machine, substrate pulse welding machine, substrate wiring welding machine, Substrate optical device module hot press

Related Products

Keep in touch
 +86 13450659407

Quick Links

Get inspired

Subscribe for our newsletter
Copyright © YUSH Electronic Technology Co.,Ltd