Welcome to the official website YUSH Electronic Technology Co.,Ltd
Find quality Depaneling Manufacturers_v-cut Machine Suppliers _PCB cutting machine Exporters_PCB Router Importers_pcb cutting machine Wholesalers
Laser cutting machine features
1. Laser cutting machine YSV-4A, dual platform, greatly improving production efficiency, is specially designed for FPC and PCB processing.
2. High-performance laser: It adopts the international first-line brand solid-state UV laser, which has the advantages of good beam quality, small focusing spot, uniform power distribution, small thermal effect, small slit width and high cutting quality.7. Exhaust gas treatment system: The suction system can completely eliminate the cutting exhaust gas, avoiding the harm to the operator and the pollution to the environment.
A laser cutting machine is a laser beam emitted from a laser that is focused by a light path system into a laser beam of high power density. The laser beam is irradiated onto the surface of the workpiece to bring the workpiece to a melting point or boiling point, while the high-pressure gas coaxial with the beam blows away the molten or vaporized metal.
As the beam moves relative to the workpiece, the material is finally slit, thereby achieving the purpose of cutting.
Laser cutting processing replaces traditional mechanical knives with invisible beams. It has high precision, fast cutting, is not limited to cutting pattern limitation, saves materials by automatic typesetting, smooth cuts, low processing cost, etc., and will gradually improve or replace Traditional metal cutting process equipment. The mechanical part of the laser cutter head has no contact with the workpiece, and it will not scratch the surface of the workpiece during operation; the laser cutting speed is fast, the slit is smooth and flat, and generally no subsequent processing is required; the cutting heat affected zone is small, the sheet deformation is small, and the slit is narrow ( 0.1mm~0.3mm); no mechanical stress in the incision, no shear burr; high processing precision, good repeatability, no damage to the surface of the material; NC programming, can process any plan, can cut the whole board with large format, no need Open the mold, saving time and economy.
