Maintenance methods for industrial vacuum cleaners:

1. The industrial vacuum cleaner should be pre-inspected before the initial use, including the installation of the filter bag and the filter element, the steering of the fan, and whether the belt is firm.
2. When using the industrial vacuum cleaner, be sure to put it in a dry and ventilated place. If the suction of the industrial vacuum cleaner is in use, the suction is reduced, the suction is deteriorated, etc. First, check whether the suction pipe and the suction head are blocked. Secondly, whether the filter bag is full or not, the surface of the filter element is too dusty. If the host heats up and emits a burnt smell, and there is abnormal vibration or noise, it must be repaired in time, and it cannot be forced to use, so as to avoid unnecessary trouble and loss.

3. After using the industrial vacuum cleaner, it is necessary to clean up the dusty accessories and the debris in the dust bucket in time. In addition, the dust compartment and the dustbag should be cleaned in time after each use. Check for leaks in the perforation. Do not use a damp dust bag for dust removal.
4. Always check the plug and power cord for damage. If it is damaged, it needs to be repaired or replaced in time. Do not remove the vacuum hose of the industrial vacuum cleaner frequently, and do not over-stretch and bend it to avoid injury. In addition to regular replacement, bags and filters can be reused in the usual way. For example, the filter bag can be washed, and the filter can be shaken off by backflushing or gently tapping by hand.