SE series reflux furnace
1. Customer installed control valve can control the inlet and outlet exhaust air volume up to 145;
2. Up to 145 exhaust gas per inlet hole is controlled at 15-20M³/min;
3. Main power supply: three 380V diameter AC five wires, the main power cable diameter is greater than 35mm²;
4. Nitrogen and cold water inlet: 1/2-inch hose.
1. High heat energy: Professional heat energy supply theoretical basis, through matching the appropriate heating power and volume, to ensure large heat energy supply. Sufficient heat energy produces optimal thermal efficiency, maximizing production efficiency within the short heating zone.
2. Low energy consumption: Theoretical design and practical test, through customer verification, obtain the best repeatable result CPK value, obtain the lowest energy consumption in the factory site.
3. Thermal balance: Theoretical and practical verification, to ensure that under the same speed, the same temperature setting, the smallest heat absorption difference of the size of the components, to achieve the best balance.
4. Large size: It can handle larger size PCB on the same size machine. Dual-track machine can produce 300mm width PCB at the same time, and single-track set 550mm width PCB, which can meet the needs of many customers.
Model: SL-1 708AHSE/ SL-1 708HSE/SL-1 708NHSE/SL-1 710AHSE/SL-1 710HSE/ SL-1 710NHSE/SL-1 712AHSE/ SL-1 712HSE/ SL-1 712HSE/ SL-1 712NHSE
Heating area :8 heating areas, 16 heating modules, 10 heating modules, 20 heating modules 12 heating modules, 24 heating modules
Heating length :2950mm 3670mm 4350mm 2230mm
Cooling mode: Double cooling: forced air cooling/water cooling (Optional: three cooling zones)
Exhaust diameter value :2-145, exhaust 15m³/min*2
Width: Min50mm-Max270mm(at the same time)/Min50mm-Max500mm(single track)
Conveying direction :L→R, R→L
Entrance height :900±20mm
Fixed rail side: The front and rear end rails are fixed, and the 2 central rails are adjustable
Transport mode: chain + network belt synchronous transport
Component height: Clearance based on guide rail :30mm above, 20mm below
Transmission speed :300mm-1500mm/min(optional double speed)
Power supply :AC3 5W 380V 50/60Hz
Total power :57kw 71kw 89kw 45kw
Starting power :30kw 35kw 40kw 30kw
Operating power :7.5kw 9.5kw 11.5kw 6kw
Temperature range: room temperature to 320℃
Control mode :PC+PLC control system
Rail width adjustment mode: electric + manual
Temperature control accuracy :±1℃
PCB temperature deviation :±2℃
Data storage: Handles data and state storage
Power failure protection: equipped with UPS
Operation interface :Windows simplified Chinese, English online free switch
Size (length * width * height):5055*1610*1515mm 5775*1610*1515mm 6495*1610*1515mm
Weight: 2500-2700kg 2900-3100kg 3300-3500kg
Manual + electric widening structure design, equipped with emergency manual transmission structure, to prevent burning PCB during power failure.
Conveying system: Stable and reliable anti-deformation structure design.
Built-in temperature profile test function, virtual simulation function, save setting time.
Two cooling zones
Cooling system, new patent structure design, forced air cooling, water cooling structure, can be upgraded and replaced; Easy and fast maintenance; Cooling zone temperature display is adjustable.
Modular structure for easy cleaning and maintenance. Front and rear return air design, effectively prevent the influence of air flow between regions, to ensure accurate temperature control. Long life high performance hot air motor. Inverter control, wind speed adjustable hot air motor.
High precision nitrogen flow agent and oxygen analyzer can accurately control the nitrogen flow, and can be equipped with nitrogen closed-loop control system, to achieve low nitrogen consumption, low cost production.
Optional: Full nitrogen filling optional, multi - way to protect product welding quality, improve production efficiency.
On-line maintenance of reflux furnace system, simple operation, convenient and fast, effectively reduce customer production costs.
----- Welcome customers to hold samples or send samples to test machine evaluation! ------
Su Dongguan Yu Shunli specializes in the design, production and sales of PCB board senders, knife senders, lamp strip senders, multi-knife senders,led senders, pneumatic senders, automatic senders, guillotine senders, curve senders,V slot senders,vcut senders and punching senders LED light strip splitter,LED aluminum substrate splitter, stamp hole splitter,PCB board cutting machine, circuit board splitter, automatic splitter, punch plate splitter, aluminum substrate splitter,FPC splitter, etc.
Substrate splitter Suzhou Dongguan Shunli splitter equipment is mainly used in: Substrate splicing machine communication equipment, smart phones, tablets, computer circuit boards, household appliances, security electronics,LED lighting and other PCB board, FR4 PCB, FR6 PCB, flexible circuit board (FPC), hard and soft board, aluminum substrate, copper substrate splicing machine,LED light strip and so on
Suzhou Yushun Li Electronics Co., LTD
South China Address: (Headquarters) 10 Shanquan Road, Yongtou Village, Dongguan City, Guangdong Province
Miss Liu consultation telephone: 13862072520
East China Address: No. 1068 Jinyang East Road, Kunshan City, Suzhou City, Jiangsu Province (Guorui Industrial Park)
Mr. Cao consultation telephone: 13450659407
Business Scope: Laser slitting machine, automatic milling cutter slitting machine, online PCB Router machine, PCB,FPC, slitting machine, copper slitting plate aluminum slitting plate slitting die, punching and pressing slitting plate splitter machine, punching machine automatic MCPCB splitter # type automatic splitter FPC laser splitter equipment light strip splitter FPC splitter PCB board splitter V cut cutting machine punch machine splitter, Substrate pulse welding machine, substrate line welding machine, substrate optical device module hot press tin paste screen printing machine soldering press online/offline selective wave soldering V cutting machine PCB lead cutting machine V cutting machine cleaning machine