English English |
S series reflux furnace
Technical Requirements:
1. Customer installed control valve can control the inlet and outlet exhaust air volume up to 145;
2. Up to 145 exhaust gas per inlet hole is controlled at 15-20M³/min;
3. Main power supply: three 380V diameter AC five wires, the main power cable diameter is greater than 35mm²;
4. Nitrogen and cold water inlet: 1/2-inch hose.
Product Features
1. Durable, interchangeable double-sided guide rail and special hardening treatment;
2. Stainless steel belt chain with protective device, anti-clip, practical and reliable;
3. New flux recovery system, fully modular design, easy and fast maintenance, reduce maintenance time and cost;
4. Patented hot air system, higher efficiency, faster heat compensation;
5. New furnace structure design, multi-layer heat insulation, effectively reduce the working environment temperature
Technical parameters
S series reflow furnace main specifications
Model: YSL-08AS/YSL-08NS/YSL-10AS/YSL-10NS/YSL-12AS/YSL-12NS/YSL-08DAS/YSL-08DNS/YSL-10DAS/YSL-10DNS/YSL-12DAS/YSL-12DNS
Heating system
Heating zones: 8 heating zones, 16 heating modules 10 heating zones, 20 heating modules 12 heating zones, 24 heating modules 8 heating zones, 16 heating modules 10 heating zones, 20 heating modules 12 heating zones, 24 heating modules
Heating length 3120mm 3870mm 4635mm 3120mm 3870mm 4635mm
Cooling mode Three cooling zone: forced air cooling/water cooling
Outlet exhaust diameter, value 2-145, exhaust demand 15m³/min x2
Conveying system
Product width Min50mm-Max400mm Min50mm-Max270mm(double track simultaneously)
Min50mm-Max500mm(double track alone)
Conveying direction large → right, right → large
Entrance height 900±20mm
Fixed rail side the front rail is fixed (option: rear rail is fixed) the front and rear guide rails are fixed, and the middle two guide rails are movable
Conveyor type chain + mesh belt synchronous drive
Component height rail clearance: 30mm above, 25mm below
The transmission speed is 300mm-2000mm/ min
Control system
Power supply: AC30 5W 380V 50/60HZ
Total power 59KW 73KW 91KW 70KW 89KW 108KW
Start power supply 30KW 35KW 40KW 35KW 40KW 45KW
Operating power 7.5KW 9.5KW 11.5KW 10KW 11.5KW 13KW
Temperature range: room temperature to 320 ℃
Control Type PC+PLC control system
Rail width adjustment mode electric + manual
Temperature control accuracy ±1 ℃
PCB temperature deviation ±1 ℃ ±2 ℃
Data storage Procedure data and state storage
Power outage protection with UPS
Operation interface Windows Free online switching between simplified Chinese and English
Dimensions (L * W * H) : 5580x1450x1620mm 6300x1450x1620mm 7020x 1450x1620mm 5580x1735x1620mm 6300x1735x1620mm 7020x1735x1620mm
Weight: 2200-2400kg 2600-2800kg 3000-3200kg 2700-2900kg 3000-3200kg 3300-3500kg
----- Welcome customers to hold samples or send samples to test machine evaluation! ------
Su Dongguan Yu Shunli specializes in the design, production and sales of PCB board senders, knife senders, lamp strip senders, multi-knife senders,led senders, pneumatic senders, automatic senders, guillotine senders, curve senders,V slot senders,vcut senders and punching senders LED light strip splitter,LED aluminum substrate splitter, stamp hole splitter,PCB board cutting machine, circuit board splitter, automatic splitter, punch plate splitter, aluminum substrate splitter,FPC splitter, etc.
Substrate splitter Suzhou Dongguan Shunli splitter equipment is mainly used in: Substrate splicing machine communication equipment, smart phones, tablets, computer circuit boards, household appliances, security electronics,LED lighting and other PCB board, FR4 PCB, FR6 PCB, flexible circuit board (FPC), hard and soft board, aluminum substrate, copper substrate splicing machine,LED light strip and so on
Suzhou Yushun Li Electronics Co., LTD
South China Address: (Headquarters) 10 Shanquan Road, Yongtou Village, Dongguan City, Guangdong Province
TEl: 0769-88087410
Miss Liu consultation telephone: 13862072520
East China Address: No. 1068 Jinyang East Road, Kunshan City, Suzhou City, Jiangsu Province (Guorui Industrial Park)
TEl: 0512-62751429
Mr. Cao consultation telephone: 13450659407
Email: seles@hk-yush.com
Business Scope: Laser slitting machine, automatic milling cutter slitting machine, online PCB Router machine, PCB,FPC, slitting machine, copper slitting plate aluminum slitting plate slitting die, punching and pressing slitting plate splitter machine, punching machine automatic MCPCB splitter # type automatic splitter FPC laser splitter equipment light strip splitter FPC splitter PCB board splitter V cut cutting machine punch machine splitter, Substrate pulse welding machine, substrate line welding machine, substrate optical device module hot press tin paste screen printing machine soldering press online/offline selective wave soldering V cutting machine PCB lead cutting machine V cutting machine cleaning machine
