Product Category

Share to:

U series reflux furnace

8888
  • YSL-808AU
  • 宇顺力
Availability:
Quantity:

U series reflux furnace


1.jpg


Technical Requirements:


1. The customer installs a control valve to control the inlet and outlet exhaust up to 145;


2. Each up to 145 inlet holes exhaust gas control of 15-20M³/min;


3. Main power supply: three 380V lines with five AC lines, the diameter of the main power line is more than 35mm².


2.jpg




U series product features


1. High thermal energy, low energy consumption, high-power motor matching wind wheel, theoretical and practical verification; Under the same conditions, small parts and large parts can be guaranteed to achieve the minimum heat absorption difference, to achieve the best thermal balance;


2, the latest insulation technology and new furnace structure design, effectively reduce the furnace surface temperature, reduce heat loss;


3. Imported PLC program controller, stable and reliable performance, temperature control, high precision curve repetition;


4. Double-sided guide rail by special hardening treatment, durable, reusable, saving up to 50% of the cost;


5. Rosin recovery system online maintenance, modular design, easy maintenance, reduce maintenance time;


6. Patented hot air system, hot air convection conduction is more efficient, faster heat compensation;


7. Built-in real-time monitoring system for furnace temperature, which can automatically generate furnace temperature curve (optional);


8. Intelligent data can be traced and uploaded to MES system.


3.jpg

4.jpg




Heating module design, easy to maintain and clean. The backflow design isolates the heating effect between heating zones for precise temperature and longer hot-air motor life. Also through the motor frequent control, you can adjust the speed of the airflow.


5.jpg


Manual + electric widening structure design, equipped with emergency manual transmission structure, prevent power failure to burn PCB.


6.jpg


Special adjustable width and transmission design, through the anti-card chain to ensure stable and reliable PCB transmission.


7.jpg

High stability control system, powerful function.


8.jpg


Technical parameters


U series reflow furnace main specifications


Model: YSL-808AU/YSL-808NU YSL-810AU/YSL-810NU YSL-812AU/YSL-812NU


Heating system


Heating area 8 heating areas, 16 heating modules 10 heating areas, 20 heating modules 12 heating areas, 24 heating modules


Heating length 2950mm 3670mm 4390mm


Cooling mode Three cooling zone: forced air cooling/water cooling


The outlet exhaust diameter is 2-0145, and the exhaust demand is 15-20m³/min x2


Conveying system


Product width minimum 50mm- maximum 400mm


Conveying direction left → right, right → left


Entrance height 900±20mm


Fixed rail side front rail fixation (Option: rear rail fixation)


Conveyor belt type chain + network synchronous transmission


Element height +30mm; - Clearance above 25mm/30mm, clearance below 25mm


The transmission speed is 300mm-2000mm/ min


Control system


Power supply :AC30 5W 380V 50/60HZ


Total power 57KW 71KW 89KW


Start power supply 30KW 35KW 40KW


Operating power 7.5KW 9.5KW 11.5KW


Temperature range -320℃/ room temperature 320℃


Control Type PC+PLC control system


Rail width adjustment mode electric + manual


Temperature control accuracy ±1℃


PCB temperature deviation ±1℃


Data stored procedure data and state records


Power outage protection with UPS


Operation interface Switch between Windows Simplified Chinese and English online


Dimensions (L x W x H) 5580*1450*1620mm 6300x1450x1620mm 7020x1450x1620mm


Weight: 2300-2500 kg; 2700-2900 kg; 3100-3300 kg


1.jpg






----- Welcome customers to hold samples or send samples to test machine evaluation! ------


Su Dongguan Yu Shunli specializes in the design, production and sales of PCB board senders, knife senders, lamp strip senders, multi-knife senders,led senders, pneumatic senders, automatic senders, guillotine senders, curve senders,V slot senders,vcut senders and punching senders LED light strip splitter,LED aluminum substrate splitter, stamp hole splitter,PCB board cutting machine, circuit board splitter, automatic splitter, punch plate splitter, aluminum substrate splitter,FPC splitter, etc.


Substrate splitter Suzhou Dongguan Shunli splitter equipment is mainly used in: Substrate splicing machine communication equipment, smart phones, tablets, computer circuit boards, household appliances, security electronics,LED lighting and other PCB board, FR4 PCB, FR6 PCB, flexible circuit board (FPC), hard and soft board, aluminum substrate, copper substrate splicing machine,LED light strip and so on


Suzhou Yushun Li Electronics Co., LTD


South China Address: (Headquarters) 10 Shanquan Road, Yongtou Village, Dongguan City, Guangdong Province


TEl: 0769-88087410


Miss Liu consultation telephone: 13862072520


East China Address: No. 1068 Jinyang East Road, Kunshan City, Suzhou City, Jiangsu Province (Guorui Industrial Park)


TEl: 0512-62751429


Mr. Cao consultation telephone: 13450659407


Email: seles@hk-yush.com


Business Scope: Laser slitting machine, automatic milling cutter slitting machine, online PCB Router machine, PCB,FPC, slitting machine, copper slitting plate aluminum slitting plate slitting die, punching and pressing slitting plate splitter machine, punching machine automatic MCPCB splitter # type automatic splitter FPC laser splitter equipment light strip splitter FPC splitter PCB board splitter V cut cutting machine punch machine splitter, Substrate pulse welding machine, substrate line welding machine, substrate optical device module hot press tin paste screen printing machine soldering press online/offline selective wave soldering V cutting machine PCB lead cutting machine V cutting machine cleaning machine


Related Products

Keep in touch
 +86 13450659407

Quick Links

Get inspired

Subscribe for our newsletter
Copyright © YUSH Electronic Technology Co.,Ltd