Product Category

Share to:

YSL-T9 visual full-automatic printing machine

  • YSL-T9
  • 宇顺力

YSL-T9 visual full-automatic printing machine


Product features: 1. Intelligent and high-precision PCB thickness adjustment platform lifting mechanism

2. The screw rod imported from Germany is used for more stable operation and more accurate positioning

3. The first online calibration technology in China

4. Intelligent 2D detection

Overall schematic diagram: 1. Rack module

2. Jacking module

3. Platform alignment module

4. Housing module

5. Image taking module

6. Mesh frame positioning module

7. Scraper module

8. Display module

9. Clean the module

10. Transport module

11. Air supply power input module


Technical parameters:

Basic parameters

Steel mesh size (mm) 650 (X) * 420 (Y) -- 1000 (X) * 880 (Y)

Thickness: 20-40mm

Minimum PCB size (mm) 50 (X) * 50 (Y)

Maximum PCB size (mm) 610 (X) * 510 (Y)

Thickness 0.2mm-6mm (add fixture below 0.4mm)

Warpage < 1% (measured diagonally)

Back element height 20mm

Transmission height 900 ± 40mm

Support mode: magnetic thimble, magnetic top block, vacuum suction chamber (optional)

Clamping mode Side clamp (standard configuration)

The distance from the board edge to the PCB process edge is ≥ 2.5mm

Transportation speed 0-1500mm/s, increment 1mm

Transport belt type U-shaped synchronous belt

Stop plate mode cylinder

Transfer position Set PCB stop position according to PCB size software

Transmission direction left right left left left right customer specified before delivery

Printing speed of printing system 5-200mm/s adjustable

Printing head stepping motor directly drives scraper lifting

Scraper steel scraper, rubber scraper (optional)

Scraper angle 60 °

Scraper pressure 0-20KG

Visual system demoulding mode Three stage demoulding speed: 0.1-20mm/s Distance: 0-20mm

Alignment mode Mark point automatic alignment

Camera German BASLER 1/3 '' CCD, 640 * 480 pixels

Image taking mode Up/down double lighting

Camera light coaxial light and annular light are adjustable in 4 channels

Field of vision 9mm * 7mm

The dimension diameter or side length of the marking point is 1mm - 2mm, and the allowable deviation is 10%

The shape of the marking point is round, square, diamond, etc

Mark or PCB pad special for PCB

2D detection standard configuration

Adjustment range of precision platform X=± 3mm Y=± 7mm θ= ±1.5°

Positioning accuracy ± 0.01mm

Printing accuracy ± 0.025mm

Time cycle time < 10s (excluding printing and cleaning time)

Line change time < 5 minutes

New program time < 10 minutes

The control system computer is equipped with an industrial personal computer and a Windows genuine system

System language: Chinese and English

SMEMA connection between upper and lower computers

User rights User password or advanced password setting

Cleaning system Cleaning system dry and wet (standard), vacuum mode (optional)

Liquid level detection Liquid level automatic alarm monitoring

Power parameters Main power supply AC220V ± 10% 50/60HZ single-phase

Total power: about 3kw

Main air supply 4.5-6kgf/cm2

Machine weight is about 950KG

Overall dimensions of the machine (mm) 1400 * 1630 * 1525

Optional automatic pneumatic top clamp for thin circuit board (thickness ≤ 1mm)

Fixed top clip+side clip for thin circuit board (thickness ≤ 1mm)

Vacuum adsorption+vacuum cleaning for thin circuit board or soft board

Auto add solder paste Auto add solder paste

Automatic loading and unloading/

Flexible universal support block (pneumatic) is used for double-sided PCB board support (height of components under the board ≤ 9mm)

Automatic positioning of steel mesh Automatic positioning of steel mesh

Standard configuration of PCB thickness automatic adjustment function

Scraper pressure feedback function Scraper pressure feedback function

Optional air conditioner or purchased by the customer

Solder paste quantity monitoring system Solder paste quantity monitoring system

SPI Online SPI Online

UPS power-off protection UPS 15 minute power-off protection

Industry 4.0 barcode tracking, generation analysis, etc

Features: 1. The first online calibration technology in China

2. Intelligent 2D detection

3. New scraper

4. New alcohol cleaning structure

5. New scraper pressure setting software

6. System automatic calibration function - automatic compensation for guide screw wear

7. Each factory has passed the CPK test, and a report (PDF) is available

Platform adjustment precision device (XYZ adjustment system)


Intelligent 2D detection


Mark point recognition technology


Stable print quality


Simple calibration and maintenance


Accuracy assurance


-----Customers are welcome to come to the test machine for evaluation with relevant samples of the base plate splitter or send samples------

Base plate splitter Yushunli has been a global supplier of professional plate splitter equipment for many years ◆ Yushunli in Dongguan, Suzhou is a professional designer, manufacturer and seller of PCB plate splitter, knife type plate splitter, light strip plate splitter, multi knife plate splitter, led plate splitter, pneumatic plate splitter, full-automatic plate splitter, blade type plate splitter, curve plate splitter, V-slot plate splitter, vcut plate splitter, stamping plate splitter, LED light strip plate splitter, led aluminum base plate splitter, stamp hole plate splitter, PCB plate cutter, PCB distributor, automatic distributor, punch distributor, aluminum substrate distributor, FPC distributor, etc.

Base plate splitter Suzhou Dongguan Yushunli board splitter equipment is mainly used in: base plate splitter communication equipment, smart phones, tablet computers, computer circuit boards, household appliances, security electronics, LED lighting and other PCB boards, FR4 PCB, FR6 PCB, flexible circuit board (FPC), soft and hard boards, aluminum substrates, copper substrate slicers, LED light strips, etc

Suzhou Yushunli Electronics Co., Ltd. South China Address: (Headquarters)

Address: No. 10, Shanquan Road, Yongtou Village, Dongguan, Guangdong

Tel: 0769-88087410

Miss Liu's hotline: 13862072520

Address in East China: Address: No. 1068, Jinyang East Road, Kunshan City, Suzhou, Jiangsu Province (Guorui Industrial Park)

Tel: 0512-62751429

Mr. Cao's hotline: 13450659407


Business scope: laser baseplate splitter, full-automatic milling cutter splitter, online PCB Router, PCB, FPC, baseplate, copper baseplate, aluminum baseplate cutting and splitting die, stamping and splitting machine, non-standard automatic customization of punching machine, full-automatic MCPCB splitter, Substrate optical device module hot press solder paste screen printing machine solder printing machine online/offline selective wave soldering V cutting machine PCB lead wire cutting machine V cutting machine cleaning machine board brush pcb reflow furnace reflow welder lead-free reflow furnace

Related Products

Keep in touch
 +86 13450659407

Quick Links

Get inspired

Subscribe for our newsletter
Copyright © YUSH Electronic Technology Co.,Ltd